^^^
So is the noise gone now?
Yes it is. No more noise.
I need to look at the stock mount again but it actually seemed okay when I took it off. There was some play in the bearing but nothing major. Maybe the mount and bearing separated and became unseated. Just a theory. Unfortunately it was late and I didn't think to check that before I took the strut apart.
Btw, does it matter how the end of the spring is positioned against the bearing?
On the reinstall I positioned the end of the spring against the thin side of the bearing to make it as level as possible. Not sure if that matters but figured it couldn't hurt.
Sent from my iPhone using Tapatalk