JB4 Logging, stacking and Map 6 Discussion

[ChrisMk77]

Finally got to make a quick log tonight. 6K was the furthest I could go and I started earlier but the log didn't start right away.

Map 3 3rd Gear
https://datazap.me/u/acorazza/map-3-1117?log=0&data=1-3-4-6-11-14-36&zoom=0-43&mark=0
Map 3 2nd Gear into 3rd from last week
https://datazap.me/u/acorazza/map-3-111?log=0&data=1-4
Not many open roads that are good for logging by me but what do you guys think

Looks pretty good

 

[ChrisMk77]

Is anybody running e85 with JB4? Any base map 6 recommendations to start with?

MK7 GTI - JB4 + Catless DP + intake + turbo inlet + custom exhaust, otherwise stock.

Log map3 first, most likely need IC in Brazil.

 

[Ramon64124]

New firmware incoming. Had made a post for testers, got a handfull so will let you guys know when its public.

Do you have a changelog? Excited!

 

[BrianThatCoolGuy]

Hey guys, I’m tweaking around map6. These are my settings and here’s the last log I took. Seems to be clean, no timing pull and trims seem to be fine as well.

https://datazap.me/u/brianpe94/jb4-map6-7psi?log=0&data=12-14
I’m thinking of turning it up some more, any suggestions?

2018 GTI DSG, IE open intake, CTS inlet pipe, E30 mix.

 

[Diggs24]

355whp/393wtq stock IS20.
Maestro Tune by Frank Mabo @ MaboTech, ED DSG Tune, CTS catless DP, Injen Intake, Magic "eBay" IC, E50 Mix, CTS Motor Mount Insert.

:confused face:

 

[Diggs24]

Try these from 5k+

https://datazap.me/u/diggs24/log-1502840894?log=0&data=1-3

 

[BrianThatCoolGuy]

355whp/393wtq stock IS20.
Maestro Tune by Frank Mabo @ MaboTech, ED DSG Tune, CTS catless DP, Injen Intake, Magic "eBay" IC, E50 Mix, CTS Motor Mount Insert.

:confused face:

LOL I forgot that was my signature. I sold that car a couple of years ago. Trying to keep things simple now with the JB4.

 

[BrianThatCoolGuy]

Try these from 5k+

https://datazap.me/u/diggs24/log-1502840894?log=0&data=1-3

I’m using my phone, you mine posting the RPM/PSI breakdown?

 

[Diggs24]

5000 8.5
5500 8.0
6000 7.5
6500 7.0
7000 7.0

 

[BrianThatCoolGuy]

https://datazap.me/u/brianpe94/log-1579702072?log=0&data=1-4
I think I’m gonna dial it back 1psi from 5k-6k

 

[Diggs24]

So back where it was before. We've come full circle.

 

[Ramon64124]

More mid range beef.

 

[Jambroni]

Could someone take a look at these logs? Thanks!

https://datazap.me/u/jambroni/jb4-map-6?log=0&data=1-4
Car is a 2019 Seat Cupra DSG 7 so same engine as Golf R 7.5

 

[Diggs24]

Could someone take a look at these logs? Thanks!

https://datazap.me/u/jambroni/jb4-map-6?log=0&data=1-4
Car is a 2019 Seat Cupra DSG 7 so same engine as Golf R 7.5

I see you have the flat trims problem. Keep psi target to 5 or below.

 

[Jambroni]

I see you have the flat trims problem. Keep psi target to 5 or below.

Alright thanks, what is causing that? Anyway around it other than limiting target to 5?