JB4 Logging, stacking and Map 6 Discussion

[Diggs24]

Add 1 to 5000 on up.

 

[MadMen]

New absolute log with my new downpipe. So I'm officially stage 2, and looking to match the JB4 for it. Log looks good to me, except for all the throttle cuts, which I realize is somewhat normal on the R and S3. 79* ambient.

https://datazap.me/u/madtoy/nmabs2?log=0&data=1-3-4-11&zoom=0-38

 

[Diggs24]

New absolute log with my new downpipe. So I'm officially stage 2, and looking to match the JB4 for it. Log looks good to me, except for all the throttle cuts, which I realize is somewhat normal on the R and S3. 79* ambient.

https://datazap.me/u/madtoy/nmabs2?log=0&data=1-3-4-11&zoom=0-38

Looks good.

 

[psychonosspaz]

Looks good.

Have we seen the ability to add more boost with the addition of the DP? I am getting mine soon and was curious what to expect?

 

[Diggs24]

Have we seen the ability to add more boost with the addition of the DP? I am getting mine soon and was curious what to expect?

Depends, but typically it can handle another psi in spots. Spools faster though. Octane and heat are by far the bigger factors.

 

[Crackness1]

So here's mine, using Diggs Manual settings subtracting half a point to a point at spots above 3500 RPM:

https://datazap.me/u/crackness/3rd-gear-pull?log=0&data=1-3-4-11-18&trim=0&tmin=235.43&tmax=374.75

I'm slipping all over :/ but oh well. I hardly floor it so I won't worry about it for now, just have to decide if I really want to spend $1,400 on a dkm stage 3 when it'll be overkill for the forseeable future (and wait to do it), or go with a stage 2 now and call it a day...

 

[Diggs24]

So here's mine, using Diggs Manual settings subtracting half a point to a point at spots above 3500 RPM:

https://datazap.me/u/crackness/3rd-gear-pull?log=0&data=1-3-4-11-18&trim=0&tmin=235.43&tmax=374.75

I'm slipping all over :/ but oh well. I hardly floor it so I won't worry about it for now, just have to decide if I really want to spend $1,400 on a dkm stage 3 when it'll be overkill for the forseeable future (and wait to do it), or go with a stage 2 now and call it a day...

Shave 1psi off from 3500 on down.

 

[shortyb]

Couple today. Diggs recommendations from above. 88F ambient, still with plenty of good ole southern who midty

https://datazap.me/u/shortybdub/log-1532732173?log=1&data=1-4-6

Forgot and had TC on.

https://datazap.me/u/shortybdub/log-1532732173?log=0&data=1-4

TC off.

 

[Diggs24]

Couple today. Diggs recommendations from above. 88F ambient, still with plenty of good ole southern who midty

https://datazap.me/u/shortybdub/log-1532732173?log=1&data=1-4-6

Forgot and had TC on.

https://datazap.me/u/shortybdub/log-1532732173?log=0&data=1-4

TC off.

Looks good. Room for more if you go absolute. Up to you.

 

[shortyb]

Looks good. Room for more if you go absolute. Up to you.

Damn, posted that before I finished hunting and pecking

Give me some numbers to try. Purty please.

 

[Diggs24]

This is pushing it. Keep an eye on trims and afr.

6 CYL TIMING = 1
FOL 60

1500-17
2000-19
2500-23
3000-24
3500-25
4000-26
4500-26
5000-22
5500-21
6000-20
6500-19
7000-18

 

[shortyb]

This is pushing it. Keep an eye on trims and afr.

6 CYL TIMING = 1
FOL 60

1500-17
2000-19
2500-23
3000-24
3500-25
4000-26
4500-26
5000-22
5500-21
6000-20
6500-19
7000-18

Will do. What does changing the 6 cyl timing to 1 do?

 

[Diggs24]

Will do. What does changing the 6 cyl timing to 1 do?

turns off nanny

 

[Eman1]

turns off nanny

So is that applicable for any map6 or only with certain settings. What “nanny” does it actually turn off?


Sent from my iPhone using Tapatalk

 

[AtlantaDad]

If you're married, don't let the nanny get turned on. Ask me how I know.

Sent from my SM-G955U using Tapatalk