gn4rwhals
Go Kart Champion
- Location
- Detroit, MI
DISCLAIMER: I do not take any responsibility for any damage to your car using any of these settings found here, same goes for other posters. Change settings at your own risk!
Hello all,
With the incoming release of the MAP 6 software I figured we should start a thread for the testers (and others) interested in the settings we are all using.
The basic settings from BMS are as follows:
1500 0
2000 1
2500 2
3000 3.5
3500 4.8
4000 4.8
4500 4.8
5000 4.8
5500 4.8
6000 4.8
6500 4.0
7000 3
I will start with my current settings that seem to react well to my car.
My car is running full power bolt-ons (besides swapped turbo) and 93 octane so please keep that in mind when adjusting settings.
Engine Mod List:
CTS Turbo BOV
CTS Turbo Throttle Pipe
Injen Intake
42 Draft Designs Catted 3" Turboback
Forge Twintercooler
Fuel Open Loop - 40
RPM PSI
1500 0
2000 2
2500 3
3000 3.5
3500 4
4000 4.8
4500 5.2
5000 5.2
5500 5.2
6000 5.2
6500 5.2
7000 4.8
Edit: This is my current setup.
Feel free to post VAGCOM or JB1 logs with the settings as well.
Enjoy!
Hello all,
With the incoming release of the MAP 6 software I figured we should start a thread for the testers (and others) interested in the settings we are all using.
The basic settings from BMS are as follows:
1500 0
2000 1
2500 2
3000 3.5
3500 4.8
4000 4.8
4500 4.8
5000 4.8
5500 4.8
6000 4.8
6500 4.0
7000 3
I will start with my current settings that seem to react well to my car.
My car is running full power bolt-ons (besides swapped turbo) and 93 octane so please keep that in mind when adjusting settings.
Engine Mod List:
CTS Turbo BOV
CTS Turbo Throttle Pipe
Injen Intake
42 Draft Designs Catted 3" Turboback
Forge Twintercooler
Fuel Open Loop - 40
RPM PSI
1500 0
2000 2
2500 3
3000 3.5
3500 4
4000 4.8
4500 5.2
5000 5.2
5500 5.2
6000 5.2
6500 5.2
7000 4.8
Edit: This is my current setup.
Feel free to post VAGCOM or JB1 logs with the settings as well.
Enjoy!
Last edited: