Thx u sir!
Now I feel completed.
Was wondering how to do the high beam on + fogs not just flash to pass + fogs.
I e mailed stemi.de about this and his answer was...
(11)-Dyn. turn signal modes-Notwarn_blinken_NBA_Phase_2
(15)-Dyn. turn signal modes-Crashblinken
Both should be set to "active". I heard these won't work unless you going a certain mph (60?) so I don't think anyone's confirmed this works. I tried at low speeds but my wife wasn't a big help.......
Is this for the blinking 3rd brake light? I haven't tried it but I'd love to know as well
I believe this mod is called high intensity braking... Or something like that.
Sent from my iPhone using Tapatalk
Does anybody know the security access code for module 17 Instruments in the new 2016 GTI models? the old 20103 doesn't seem to work although it worked on my old 2014 GTI.
Does anyone know why I couldn't get my coming/leaving home stuff to work right? The problem I'm having is, when I turn the car off with the switch in auto, and leave the keys in, the coming home feature appears to be on, as I can see my DRLs on the wall in front of me. But as soon as I take the key out, they turn off. I've tried switching that one setting from Ignition to Door and vice versa.
Anyone experience this?
Sent from my iPhone using Tapatalk
It seems like the VW chaps have changed the coding of the voice control button for the cars without voice control. On my 2014 GTI the voice control button would pause/mute the music however on my 2016 GTI the button does not pause the music, it only shows that stupid message and that's about it. Does anyone know if it can be coded with VCDS to pause the music?
GeoBog: The VC function (VW call it "Speech Dialogue System") on a MIB is enabled/disabled by Bit 1 on Byte 24 (see screenshot below).
From my experience with MIB1 units, I've found that the "stupid message" that you describe results whenever this Bit is enabled and the VC software is not installed. My suggestion is that you look in the control module @ address hex5F in your car - if this Bit is set, remove the tick.
But as I recall, when the VOICE button is pressed and VC is not present, the effect is to mute the sound - it doesn't "pause the music" as you suggest
Don