El_bigote_AJ
Autocross Champion
- Location
- Las Vegas
- Car(s)
- 2019 GTI bunny
Got the driver side ttrs setup all buttoned up : tq’d, bleed, greased… also installed the zhong subframe collar kit so I can finally have my front fitment even visually and alignment wise. Not much to see other than the green washer/collars peaking out while the bolts still loose. Not tough to get them in though, just gotta loosen all 4 bolts first so you can get Enough gap to do each corner at a time.
For me personally with what these items do, it doesn’t warrant me to spend money on a “deadset” kit when all they do is center and shrink the mounting hole to bolt tolerances to directly square up the subframe to the body. Also they are only $28 bucks for the front kit lol. Zhong collars
Also for reference here’s the clearance between the 034 tall ball joints and the 370mm rotors *no dust/heat shields
For me personally with what these items do, it doesn’t warrant me to spend money on a “deadset” kit when all they do is center and shrink the mounting hole to bolt tolerances to directly square up the subframe to the body. Also they are only $28 bucks for the front kit lol. Zhong collars
Also for reference here’s the clearance between the 034 tall ball joints and the 370mm rotors *no dust/heat shields