daconchslop
Autocross Champion
- Location
- SC
- Car(s)
- ACS SE/Tech
Those are both 1. I uploaded wrong.1 and 2 have scoring.
Those are both 1. I uploaded wrong.1 and 2 have scoring.
Nice. Let's see some further away pics.Installed front 12.5mm spacers with new front hub caps. Rear spacers have not been delivered and car goes to body shop tomorrow For Repairs anyways - rear spacers and caps will be installed when i get the Car back. Before and after photo
Nice. Let's see some further away pics.
Could scoring on the walls and blow by on the piston be caused by a clogged injector (therefore running lean with more knock) on that cylinder?You would see lots of blowby in that area on the piston top too.
If it ran lean absolutely.Could scoring on the walls and blow by on the piston be caused by a clogged injector (therefore running lean with more knock) on that cylinder?
Wouldn’t that pop a CEL/EPC for lean condition? I guess a cylinder can have a “clogged injector” but not run lean? Anything to look for in logs to determine if a specific cylinder is running lean?If it ran lean absolutely.
WTF VWIt reads the exhaust in aggregate.
Both stealth versions sound great man. Nice work.Sunday morning music
This is what I did like 18 months ago. I made exactly one try and bench pressing it and decided the hell with that noise. I'm not weak but it was so awkward I figured why not use science instead of brute force.Rear main, clutch, transmission installed, and subframe bolted back up.
I did have to get a little redneck creative to lift the trans up. Really didn’t feel like muscling it in, or balancing on the jack. It actually worked remarkably well. Just ratcheted the straps up, once it was level I just did the whole wobble, and it slid right on. Then bolting it in place was super simple.
View attachment 235092
Right up there with the 2x4 method.
Sorry to see that.... Now what?Bore scope and compression test. Compression passed but the scope is concerning in #1. Looks like the cylinder wall is scored. View attachment 235132
It’s getting Riceburnered.Sorry to see that.... Now what?
It’s getting Riceburnered.
Built bottom end? If so are you gonna tackle it yourself or sending it out?