daconchslop
Autocross Champion
- Location
- SC
- Car(s)
- ACS SE/Tech
https://precisionraceworks.com/products/ea888-3-sai-block-off-plate-w-gasket
Over a year with mine installed. Issue free.
7
My Deathtrap GTI build
- Thread starter Eman1
- Start date
Over a year with mine installed. Issue free.
daconchslop
Autocross Champion
- Location
- SC
- Car(s)
- ACS SE/Tech
FYI - Selling it
Small update-
Life has gotten in the way of progress on the car a lot lately, but this past week I was finally able to get some things rolling!
I discovered a new appreciation for wrap installers. I got about 3/4 of the way finished before running out of material, which is now out of stock everywhere.
The wrap has come back off (for now). The red does look great, though!
In order to remove my failed wrap attempt, I had to tear the front end back apart. I took this time to tidy up some previous work, and take note of what needs to be done in the future.
I did find a steering rack bolt that was slightly loosened, and my Vacuum pump appears to be leaking oil for the 4th or 5th time now.
I also went ahead and did front brake pads. Still loving the Macan BBK.
I managed to finally get the axle heatshield installed, and fender liners went in. Although it's 4+ colors at the moment, the car is staring to come back together!
Life has gotten in the way of progress on the car a lot lately, but this past week I was finally able to get some things rolling!
I discovered a new appreciation for wrap installers. I got about 3/4 of the way finished before running out of material, which is now out of stock everywhere.
The wrap has come back off (for now). The red does look great, though!
In order to remove my failed wrap attempt, I had to tear the front end back apart. I took this time to tidy up some previous work, and take note of what needs to be done in the future.
I did find a steering rack bolt that was slightly loosened, and my Vacuum pump appears to be leaking oil for the 4th or 5th time now.
I also went ahead and did front brake pads. Still loving the Macan BBK.
I managed to finally get the axle heatshield installed, and fender liners went in. Although it's 4+ colors at the moment, the car is staring to come back together!
Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
Leave it like that, Madmax.
JerseyDrew77
Autocross Champion
- Location
- Virginia & NC
- Car(s)
- 2016 TR GTI S 6MT
Or start putting different colors all over it to make it a Harlequin.
El_bigote_AJ
Autocross Champion
- Location
- Las Vegas
- Car(s)
- 2019 GTI bunny
Or do none of that and get the fender and clip properly painted 
Just got the car back from wrap. I think it turned out great, and am mostly just excited for it to all be one color again!
I still need to re-pin and install the diff module, and clean up the small oil leak/odds and ends on the car. Getting close
I still need to re-pin and install the diff module, and clean up the small oil leak/odds and ends on the car. Getting close
Attachments
-
IMG_20220130_095957.jpg
Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
hot
daconchslop
Autocross Champion
- Location
- SC
- Car(s)
- ACS SE/Tech
That looks sweet. Yes. Almost looks like a Midori Green.
PowerDemon
Autocross Champion
- Location
- Richmond, VA
- Car(s)
- Golf GTI, Camaro ZL1
Fitment is tight
El_bigote_AJ
Autocross Champion
- Location
- Las Vegas
- Car(s)
- 2019 GTI bunny
Unless the springs are silly high rates with no compression. Im sure it rubs with that fitment on aggressive driving. 265s or 255s it’s looks and you can see the driver front fender been worked by the wheel or a roller.
Looks really good though
