FrancescoA85
New member
- Location
- Milan
http://it-app.volkswagen.com/ihdcc/it/configurator.html#colours/30302/32235/5G19UX$GPH2PH2$GPJ9PJ9$GPLAPLA$GW4BW4B$GZCBZCB/2016/0
Hi sigi-dr,
I can assure you that EU GTI for Italian market have not LED tail lights (also on car configurator VW Italy you can see this)
So I have syandard tail lights.....and the LED version in the box...
Please help me.
Thanks
Thanks for your answer.
I checked the "dealer method" of your post and sems nice; but then is possible to go back to the original lights (when I will re-sell the car in the future ?)
I would like to do it myself but what is exactly necessary to do the coding (special cable\software ??)
In case of not cut original wires, what is the cost of expensive adapters ?
Hi
Thank you sigi_dr, comingabriel & capitan828, as well to everybody else who contributed to this tread.
I have a 2015 GTI, Canada, presently I use my LED tail lights w/o any coding nor harness.
My questions for you guys are:
- any modifications on sigi_dr pdf doc regarding the wires swap or coding?
- any detailed info (tips) regarding the removal of the trims involved in the retrofit?
Thank you
Gabriel,
The coding you posted is NOT for LED tails, those are for halogen!
for full brake lights on LED's you need to use 27NSL !
i'll explain:
on halogen tails, 23SL and 24SL are the inner brake lights, that's why they tell you to set function C to brake light
BUT on LED's, 23SL and 24SL are the bicolor leds that run through the blinker, and as you can see in the second pic you posted, function A already defines them as brake light..
so on LED's, both inner lights are controlled by 27NSL
Grtz
Hi all,
I ended up plugging in the wire I ran from the outer light to the inside light into the wrong slot of the connector, and now I can't get the crimp back out of the connector head. Does anybody know how to pull wires out of the taillight plugs?
Hi all,
I ended up plugging in the wire I ran from the outer light to the inside light into the wrong slot of the connector, and now I can't get the crimp back out of the connector head. Does anybody know how to pull wires out of the taillight plugs?