Stage 1
7
New Garrett Turbos for MQB
- Thread starter JettiGLI
- Start date
Gotcha. Are you going to run full e85 with it?
Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
Not worth running any Ethanol.. I ran out of turbo running on 93oct
Are you disappointed with the turbo? Any dyno graphs or data logs?
El_bigote_AJ
Autocross Champion
- Location
- Las Vegas
- Car(s)
- 2019 GTI bunny
Timing advance…
that means you would benefit from ethanol lol
What fueling upgrades do you have?
jimlloyd40
Autocross Champion
- Location
- Phoenix
- Car(s)
- 2018 SE DSG
A little over 400 HP. You can come very close to that with an IS38 on E85. And a standard Vortex on E85 will get you around 460 HP.
Probably closer to 450whp given their dyno reads about 360whp for an e85 Mk7R (268awkw for is38 +e85 vs. 303awkw for gt2260s) so multiply their numbers by about 12% to match typical dynojet measurements). This is in line with what others have quoted at safe turbo speeds.
And compared to an IS38, the stock shaft, bearing, and kevlar insert are gone. Compared to a Vortex, you get a "free" wg actuator, TMD, and TIP. I think the Stage 1 makes a lot of sense for the price point.
And compared to an IS38, the stock shaft, bearing, and kevlar insert are gone. Compared to a Vortex, you get a "free" wg actuator, TMD, and TIP. I think the Stage 1 makes a lot of sense for the price point.
limited_explorer
Passed Driver's Ed
- Location
- quebec
Do a 392whp on powermax stage 1 pump gas 1.8 sportwagen super happy with that at around 26 psi
crxgator
Autocross Champion
- Location
- Raleigh, NC
- Car(s)
- All the MQBs
Im guessing you ran out of fuel?
limited_explorer
Passed Driver's Ed
- Location
- quebec
Turbo max … had mpi and 450fuel pump … really fun run 11.7 full weight 117mph the other graph is bb550 at 29 psi so turbomax make very good number … love the car with that turbo way more than before !
Those are great numbers for 91 octane. Are you going to go proflex?