[HOW TO PATCH Component Protection] MIB2 Technisat/Preh Headunit Patch(gps headunits only with 2 sd card slots)

[Giannis20vt]

I have ODB11 so i will proceed with the toolbox option, it is something i have done it already with the original software version 472T
So the link i wrote is the right one for my hardware ?

 

[Giannis20vt]

I have done this already. Of course watching this video. I think that my infotainment doesn't support voice commands.

Those are the supported FEC codes

 

[ash9949]

I have done this already. Of course watching this video. I think that my infotainment doesn't support voice commands.

Those are the supported FEC codes

try updating it and patching it
and later check the all fecs are activated and it should work, if not try manually activating the fec and swap

 

[ash9949]

I have done this already. Of course watching this video. I think that my infotainment doesn't support voice commands.

Those are the supported FEC codes

there is nothing like your mib cannot support voice unless if you dont have actual physical hardware like microphone in your domelight setup
just try watching the video and activating the voice fec

example

00070300 - VoiceControl (Online SDS with Nav)
00070200 - VoiceControl (SDS with Nav)
00070100 - VoiceControl (SDS)
these fec should be activated for voice to work
check these fec are in unsuported list

 

[ash9949]

I have done this already. Of course watching this video. I think that my infotainment doesn't support voice commands.

Those are the supported FEC codes

problem can also be that you should patch the unit properly to activate fec

 

[Giannis20vt]

try updating it and patching it
and later check the all fecs are activated and it should work, if not try manually activating the fec and swap

Thank you. Is this the correct file for my infotainment ?

https://mibsolution.one/index.php/f/165562

 

[Giannis20vt]

I have done the upgrade. Everything was correct. Now I have the 480 version.

Still can't turn on voice commands.

These pictures are from my infotainment and show supported trade-in codes.

No 00070100 or 00070200...

No idea ?

 

[dawcioral]

It's possible but 480 don't have any noticable changes and if your unit is 03xx then don't risk with updates

I made a mistake. I checked the update history and the first version shows 0449. Can I update to 0480? As I wrote, I have a bug with the long start of the FM radio.

 

[ash9949]

I have done the upgrade. Everything was correct. Now I have the 480 version.

Still can't turn on voice commands.

These pictures are from my infotainment and show supported trade-in codes.

No 00070100 or 00070200...

No idea ?


View attachment 283034View attachment 283035View attachment 283036

questions for you.
1. can answer and speak from bluetooth from your radio.? do you actually have microphone in your car installed in dome light .?
2. did you check unsupported fec code list in your mib 2 .?
3. did this mib 2 unit came with factory or did you retrofit it.?
4.which patch did you use .?
5.did you generate and inject all fec codes according your vin and other number according that video i had shared in above post .?

 

[ash9949]

I made a mistake. I checked the update history and the first version shows 0449. Can I update to 0480? As I wrote, I have a bug with the long start of the FM radio.
View attachment 283069

if your mib2 unit its written "HW:04xx , SW:04xx " then offcourse you can update to 480

 

[ash9949]

I made a mistake. I checked the update history and the first version shows 0449. Can I update to 0480? As I wrote, I have a bug with the long start of the FM radio.
View attachment 283069

what do you mean by long start .? you been your radio is play after a delay .?

 

[ash9949]

I have done the upgrade. Everything was correct. Now I have the 480 version.

Still can't turn on voice commands.

These pictures are from my infotainment and show supported trade-in codes.

No 00070100 or 00070200...

No idea ?


View attachment 283034View attachment 283035View attachment 283036

press and hold menu button

after that you will fec and swap function option

and take pictures of installed codes from top to bottom

and also take picture or supported codes from top to bottom

 

[Giannis20vt]

questions for you.
1. can answer and speak from bluetooth from your radio.? do you actually have microphone in your car installed in dome light .?
2. did you check unsupported fec code list in your mib 2 .?
3. did this mib 2 unit came with factory or did you retrofit it.?
4.which patch did you use .?
5.did you generate and inject all fec codes according your vin and other number according that video i had shared in above post .?

answers

1. Yes the Bluetooth is working fine.
2. What do you mean ?
3. Factory equipment
4. MIBSTD2_Toolbox-v1.3.1
5. I have done this with the previous version (472T), without any luck. The FECs injected but were unsupported.

 

[Giannis20vt]

I have done the upgrade. Everything was correct. Now I have the 480 version.

Still can't turn on voice commands.

These pictures are from my infotainment and show supported trade-in codes.

No 00070100 or 00070200...

No idea ?


View attachment 283034View attachment 283035View attachment 283036

Those are the supported codes.

 

[Giannis20vt]

and those are the installed