Rear Dust boots

[gtg223x]

Was swapping out the rear brake pads for red stuff and found both caliper dust boots were torn and bunched up.

Is it possible to replace the boots without refurbishing everything or is it worth doing it all?

Any good resources? I couldn't find a good YouTube tutorial.

Found the part below which looks like it includes everything.

https://www.ecstuning.com/b-centric...ClHrdz0sqbTUQGin7f0E0hrFKxAaXg5EaAn3REALw_wcB

 

[odessa.filez]

the stock boots are thin plastic. You could.buy thin plastic, velcro and zip ties and make your own. You.could do the install without removing the shock.

I think having some.protection is a good idea and will help your shocks last. It gets dirty back there.

 

[jay745]

the stock boots are thin plastic. You could.buy thin plastic, velcro and zip ties and make your own. You.could do the install without removing the shock.

I think having some.protection is a good idea and will help your shocks last. It gets dirty back there.

Lol he's talking about the brake caliper dust boots, not the shock boots

@gtg223x if you're going through the trouble, just rebuild everything.

 

[odessa.filez]

Lol he's talking about the brake caliper dust boots, not the shock boots

@gtg223x if you're going through the trouble, just rebuild everything.

yup sorry