I installed S4 calipers on my car and new lines, I have bleed the brakes 3 times and can’t get any air out. Also have a VCDS and go into brake bleed and run the pump flushing fluid.
These calipers have a slightly larger piston than the MK5 R32 and I’m hoping that is not the problem.
I have read that it’s possible to get air in the abs system which I’m hoping is the problem but I have tried flushing the line with the pump going on the car but no improvement. Any ideas?
These calipers have a slightly larger piston than the MK5 R32 and I’m hoping that is not the problem.
I have read that it’s possible to get air in the abs system which I’m hoping is the problem but I have tried flushing the line with the pump going on the car but no improvement. Any ideas?