Sorry no Audi part numbers, the company I used to work for designs/manufactures the calipers so these were pre-production samples.Ooh damn. Got part numbers?
Sorry no Audi part numbers, the company I used to work for designs/manufactures the calipers so these were pre-production samples.Ooh damn. Got part numbers?
I can confirm the b9 bolt spacing where the caliper bolts to the knuckle is the same as your cars. The a4 has 338mm rotors vs our 340.So back to the original question the op asked, is the a4 b9 calipers possible on a gti? Some modifications or rotor experiments are fine with me, just curious if it is possible without going full blown custom everything. I just purchased a set so just info building while I await arrival.
they are stretch boltsI have 2 calipers on there way. ETA of Saturday so I might be able to dry fit them on sunday. Need to order bolts though, unless i can re use my old ones.
Sorry no Audi part numbers, the company I used to work for designs/manufactures the calipers so these were pre-production samples.
So does anyone have a source for the front carrier bolts? Ecs tech was next to 0 help...they are stretch bolts
Lol, yeah Jake pointed that out to me. I'll have to ether swap left and right or swap the bleeders and the crossover. Thanks for the looking out though.bleeders up!!
are the pistons staggered?Lol, yeah Jake pointed that out to me. I'll have to ether swap left and right or swap the bleeders and the crossover. Thanks for the looking out though.
Nope. 4 equally sized pistons.are the pistons staggered?
So does anyone have a source for the front carrier bolts? Ecs tech was next to 0 help...
they are stretch bolts