Burger Motorsports - Water / Meth Install

[gn4rwhals]

My only other issue was the key on power wire not fitting underneath the relay, I would have to remove the fuse panel and cut into the wire underneath or find a new key on power source.

I tried an "add a fuse" to the fuel pump fuse, that tripped a fault in the ECU for some reason. So any other suggestions for key on power would be cool.

 

[cuper steve]

@gn4rwhals - you can use a thinner wire to tap underneath the key-on power. That's what we ended up doing.

Also there is an easier way to use the bottle, just punch a hole in the fill cap and feed the meth line through to the bottom of the bottle.

Easy-peasy!

 

[gn4rwhals]

@gn4rwhals - you can use a thinner wire to tap underneath the key-on power. That's what we ended up doing.

Also there is an easier way to use the bottle, just punch a hole in the fill cap and feed the meth line through to the bottom of the bottle.

Easy-peasy!

This is why I need the internet, I tend to over complicate things.