Cuzoe
Autocross Champion
- Location
- Los Angeles
Performance Monitor swap only exists in the 5F - but whether or not it shows anything depends on your (engine) ECU software and Gateway software. I don't know of any comprehensive list (it would be hard to put together) of what software versions provide all the info for performance monitor.Excellent, thank you.
Anyone able to offer any advice on how to get my navigation database updated?
I've removed the CID lock using the toolbox, I've downloaded the 32gb update file from VW, placed the 2 folders and txt file directly on the root of the SD card, when I put the card into either of the slots on the main glovebox unit the display says "software update data is available". After that I've tried navigating to menu, system settings, system information, update software but then I get the error "no data available, please insert a source with software update data or check the source".
Additionally, the performance monitor which was already enabled on this unit doesn't work, the temperature stays at '---' and the G-force displays stay at '-.--' or '0.00', picture attached.
Something inside of me says that the original FECs/SwAPs are probably not enabled for the VIN of this car, and as such aren't working so would need to be cleared out and re-enabled using the code generator?
Navigation swap, similarly, only exists in 5F. Sounds like you have a FEC problem though... what FECs are you showing as active?