vwlotech
Go Kart Newbie
- Location
- Lexington, KY
Getting closer to getting this done, high temp boots and seals are in, only piece left is a set of wheels,... that should ship today... hopefully...
Getting closer to getting this done, high temp boots and seals are in, only piece left is a set of wheels,... that should ship today... hopefully...
it's never ending... or seems like it at times. lolJust when I thought I was done with my brake setup, you had to go and post this!
Coming from non-pp brakes what are you guys doing for the rears? I have 7mm left in the rear so still have some life left. Can I just leave them be and install the Macan Brembos or should the front match the rear in terms of rotor style and pad?
I ordered the Macan Lines from UK Goodridge and asked for 24" length, which they seemed to comply with.What length lines are you guys running?
I'm having issues getting information from HEL and Goodridge regarding the length and angle of the banjo fitting (TTS callipers) at the calliper.
KillerBrakes have been very little help and have just said to buy their HEL lines which are around 25% more expensive than buying direct from the HEL custom site here in the UK
Are you just using Golf specification lines with the Macan fitting at the calliper end?
no chance without spacers, probably need +10 spacers at leastCurious if we think these will clear my winters? 17*7.5 48
https://m.tirerack.com/wheels/Wheel...lModel=Assetto+Gara&wheelFinish=Black+Painted
what rotor did you go with?Slowly making progress - Pads and Rotors have been ordered!
what rotor did you go with?
Has there been any more info on the pedal droop issues? Does this happen during everyday driving or only at the track?