El_bigote_AJ
Autocross Champion
- Location
- Las Vegas
- Car(s)
- 2019 GTI bunny
Hey guys, I’ve got some seats showing up this weekend, and I made the mistake of ordering them with their optional pre installed heaters... so I’m just going to use those heaters for heating purposes, but I want to make sure the passenger air bag does indeed work, so would my option to be essentially adding the passenger seat heater bottom to just that seat maybe under the other ones? I’m guessing if I rig some kind of wiring up to tell the car the seat is alway occupied will then cause the passenger seat belt chime to go off.
Also, I’m assuming the driver side doesn’t need the occupancy sensor but just wanted to confirm that with the driver side all I will have to do is the air bag resistor? (Thanks for the part numbers Navi, I order the clips and wire as that clean install is perfect)
Also, I’m assuming the driver side doesn’t need the occupancy sensor but just wanted to confirm that with the driver side all I will have to do is the air bag resistor? (Thanks for the part numbers Navi, I order the clips and wire as that clean install is perfect)