nype
Drag Racing Champion
- Location
- Vancouver, B.C.
How does yours fit? I got a set a few months ago and they mount perfectly but the are very loose if you try to wiggle them. Not tight like the OEM ones at all.
Where from?
How does yours fit? I got a set a few months ago and they mount perfectly but the are very loose if you try to wiggle them. Not tight like the OEM ones at all.
How does yours fit? I got a set a few months ago and they mount perfectly but the are very loose if you try to wiggle them. Not tight like the OEM ones at all.
Yes they did wobble a little where the pin fits through the two holes, the holes are a tiny bit too big making the pin loose, I remedied this by adding some heat shrink to the pin (easily completely reversible) the heat shrink fitted tight before I even applied heat so barely increased the size of the pin making for a “perfect” fit, I knew before purchase that they could be loose but at £40 delivered it was worth it, as otherwise they are great and function perfectly, carefully painting inside the two holes would likely have the same effect, worth the £150 saving in my opinion! If I find I really like them I’ll probably purchase some genuine ones and if not then no great loss!
Sent from my iPhone using Tapatalk
Where from?
Yes they did wobble a little where the pin fits through the two holes, the holes are a tiny bit too big making the pin loose, I remedied this by adding some heat shrink to the pin (easily completely reversible) the heat shrink fitted tight before I even applied heat so barely increased the size of the pin making for a “perfect” fit, I knew before purchase that they could be loose but at £40 delivered it was worth it, as otherwise they are great and function perfectly, carefully painting inside the two holes would likely have the same effect, worth the £150 saving in my opinion! If I find I really like them I’ll probably purchase some genuine ones and if not then no great loss!
Sent from my iPhone using Tapatalk
Second set of Amazon knock-offs just arrived today. I can insert the pin now, but they’re loose / wobbly, as you described.
I’m not interested in getting creative with making them fit more snug. Although I applaud your efforts.
These are going back and will be replaced with some genuine ones.
Inside set are the new ones, outside are the old ones.
Im sure you'll see the unbranded version of this tray on AliExpress/Ebay soon enough.
Second set of Amazon knock-offs just arrived today. I can insert the pin now, but they’re loose / wobbly, as you described.
I’m not interested in getting creative with making them fit more snug. Although I applaud your efforts.
These are going back and will be replaced with some genuine ones.
Inside set are the new ones, outside are the old ones.
An accident with some takeout resulted in the entire container of food being spilled on the center console and down the sides of both front seats. After wiping up my pool of tears I tore out both front seats to clean everything and ended up doing a full interior detail including steaming all surfaces, treating the dash, and conditioning all leather surfaces.