Greetings from Romania !
First of all, I want to thank to all of you for the info in this great topic. Tomorrow I am planning on installing a pair of second hand golf R tail lights that I bought for a really good price and also doing the sequential turn signal. I think Zed's DIY looks really easy and turned out to be a heck lot cheaper than buying an adapter.
(link:
https://www.youtube.com/watch?v=0c8jCZzVvGU&t=631s)
Before I start doing this, I still have a few questions for you guys if you don't mind helping confused newbie.
1. First question is about the outer tail light connector. I am having trouble finding the flexible clip that releases the black connector from the white/grey one. I will attach a photo of the connector so that you could point out where is the release tab.
2. Regarding the black connector on the outer tail light, opening the connector is it as easy as prying open the black tab holding the pins with just a flat screwdriver ? or are there any other tricks that I may have missed ?
These questions may sound stupid but I am really afraid of breaking any tabs or connectors.
And finally:
3. Has everyone used pins to connect the turn signal cable in the inner tail light connector ? Or are there any other options connecting this cable without them ? They are a bit hard to find here in Bucharest and also a bit too expensive.
That being said, thank you for taking your time to read all this.