yo guys! I am following this because I want to retrofit the camera as well, of course without changing the windshield.
my windshield is the version with the rain sensor, and some time ago I had already retrofitted the basic camera FLA mirror 3G0 857 511 AE. so I already have the mirror cover. I wonder if I can replace the mirror camera with the Lane Assist camera. I choose the 5Q0 camera because I have the old round ACC radar.
or maybe a bracket would be better with 3D printing but that is not my field of expertise, I would need the file and go to a 3D printing facility.
side note for all of you guys. buy a stupid cheap CAT5e/CAT6 Ethernet patch cord, strip it and you have four CAN-BUS pairs
PS I also commented on Piotr blog
Hey, Welcome xD
You should be able to get the sensor off the mirror and mount the 5q0 camera on a 3d printed bracket, Thats what i did.
HUGE UPDATE:
I Just calibrated the camera and activated everything, I Havent tried HBA As its still morning here.
The traffic sign works perfectly, And the lane assist is nice but needs clear road marks to work good.
Now Im just waiting for the mirror cover to make it all permenant.
P.S When you guys calibrate the camera, make sure it is flat against the mirror housing. At first ODIS said "Calibration Marks Covered" And i thought my board wasnt good, but the camera wasnt sitting flush against the mirror housing and the second i fixed it to the mirror it worked.
Last edited: