stephenwmc
New member
- Location
- Mid Wales
Has anyone done this?
Based on the link below, it looks possible:
http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://www.drive2.ru/b/1738295/&prev=search
I've already got hold of the correct mirror part with the camera. This is just the basic high beam assistant that is built into the mirror, not the full lane assist camera that attaches to the windscreen.
It looks like I then just need to run a twisted pair cable from pin 3 and 8 of the mirror plug into pin 7 and 17 of the CAN gateway. This is the part that seems a bit hazy. I'm not sure whether there are already wires going into pins 7 and 17 of the gateway or whether i'll just need to plug my cable into it.
I've got a VCDS cable, so the coding side shouldn't be an issue.
Based on the link below, it looks possible:
http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://www.drive2.ru/b/1738295/&prev=search
I've already got hold of the correct mirror part with the camera. This is just the basic high beam assistant that is built into the mirror, not the full lane assist camera that attaches to the windscreen.
It looks like I then just need to run a twisted pair cable from pin 3 and 8 of the mirror plug into pin 7 and 17 of the CAN gateway. This is the part that seems a bit hazy. I'm not sure whether there are already wires going into pins 7 and 17 of the gateway or whether i'll just need to plug my cable into it.
I've got a VCDS cable, so the coding side shouldn't be an issue.