Nuje
Go Kart Champion
- Location
- Island near Vancouver
- Car(s)
- 2015 Sportwagen TDI
I got exactly this far in my retrofit attempt (2015 Mk7 Highline / SEL with MIB1-->MIB2 conversion already):
Everything lights up; I have sound coming from the stereo (MOST splitter cable connected), the cluster recognizes the car is a TDI (note the tach's redline), but there's nothing I can do to get the car to power up (KESSY); I've tried pushing START/STOP, holding START/STOP, holding key against the steering column...nothing wakes the car up when the new cluster is installed. Put the old one in and everything lights up and car fires up as normal.
Only module I'm able to read with VCDS with the VC installed is 19-CAN GATEWAY - everything shows as "no response from controller".
Any ideas as to how/why the car isn't lighting up, and how I can get past that?
Everything lights up; I have sound coming from the stereo (MOST splitter cable connected), the cluster recognizes the car is a TDI (note the tach's redline), but there's nothing I can do to get the car to power up (KESSY); I've tried pushing START/STOP, holding START/STOP, holding key against the steering column...nothing wakes the car up when the new cluster is installed. Put the old one in and everything lights up and car fires up as normal.
Only module I'm able to read with VCDS with the VC installed is 19-CAN GATEWAY - everything shows as "no response from controller".
Any ideas as to how/why the car isn't lighting up, and how I can get past that?