[FONT="]I don't have one from HPA since they never provided one. Here is a link for MK5/MK6 for reference. It will be self-explanatory once you get in there.
[FONT="]http://www.hpamotorsport.com/isheets/HVW-904-Core%20Interlock%20Dog%20Bone%20Mount%20Install%20Instructions.pdf
[/FONT][/FONT] [FONT="]Torque specs are as follows:[/FONT]
[FONT="]
[/FONT][FONT="]For the larger bolt supplied - the one that goes through the red "puck" - 100nm[/FONT]
[FONT="]
[/FONT][FONT="]For the smaller bolt supplied - the one that secures the dog bone "arm" to the factory mount - 70nm[/FONT]
[FONT="]
[/FONT][FONT="]For the two bolts that you remove and re-install to attach the factory mount to the transmission - 40nm[/FONT]
Hope this helps.