theDoktor
Go Kart Champion
- Location
- Buffalo, NY area
- Car(s)
- 2017 GTI Sport
Just installed my new 034 RSB with the adjustable ECS links yesterday and test drove it today. I have some mild clunking that wasn't there before I made the switch, but nothing horrible. Everything was installed slightly more than finger tight with the suspension unloaded, then tightened with the suspension loaded. Not sure if it's a RSB issue, but the lower end of the link on the passenger side of the car didn't want to line up with the bolt hole in the lower control arm until I loaded the opposite side suspension. It looks like there's a fair amount of pre-load on one side of the bar, but I won't be able to confirm until I can get a hold of a pair of race scales. I installed the links at 4 full turns out from the shortest length.