rowdyzombie
Go Kart Newbie
- Location
- Plano, TX
Hi, I have read numerous posts about a plastic coolant connector that fails due to age/heat.
I got around to replacing it with an EMD unit from ECS. Use coolant clamp pliers to remove top clamp then torx 27 to remove bottom bolt. I added about 1/3 gallon of coolant.
Future headache avoided.
I got around to replacing it with an EMD unit from ECS. Use coolant clamp pliers to remove top clamp then torx 27 to remove bottom bolt. I added about 1/3 gallon of coolant.
Future headache avoided.