BCM exchange for DLA

[jacekk1986]

I need to exhchange my BCM 5Q0937087AA (low version) to BCM high version due to the fact I installed front camera and front headlamps with DLA. Unfortunately my highbeams don't want to work due to the fact my old lamps have 11 PIN (12V for shutter) and my new lamps haven't 11 pin and shutter is controlled by can. In BCM I need to change option Hibeams controlled by AFS but I haven't this option in BCM 5Q0937087AA. Can someone conform that 5Q0937087AS is high version of BCM and its correct to exchange with 5Q0937087AA?
Thanks in advance for help.

 

[mr-fix]

You also need to code module 0x55 [xenon range] to take over the high beam control.
Standard bixenon is using simple shutter that goes on and off, which is not a problem for 0x09 [BCM].
But DLA projector is using rotating shutter, with stepper motor, hall sensor to determinate current position. This is controlled from 0x55.

Anyway, check module 0x09, LongCoding, Byte 02, bits 0-2. Mine is set to off, on, on - and I do have factory bi-xenons with DLA. Value is called AFS, FLA, Fernlicht(GLW,MDF).

 

[Kushdaiin]

Check out this thread. I retrofitted DLA on my Golf R and provided the coding changes to enable it, if that helps.
https://www.golfmk7.com/forums/inde...amic-main-beam-xenon-headlights.377703/page-3

 

[jacekk1986]

Unfortunately I haven't any other options in these bytes.

 

[Kushdaiin]

Do you have all the correct modules/headlights (including revisions) to make this mod work. I listed all of the necessary components in that forum. Also what version of VCDS are you using? Pretty sure I'm using a level of version 22.

 

[jacekk1986]

Afs modul is with letter D- 7P6907357D. AFS modules in lamp also have D- 3D0941329D. Gateway is HIGH version. VCDS is 21.3.0