Search results

Found what I needed. Thanks! Sent from my LG-LS993 using Tapatalk

I'm trying to get my car to pass Missouri State Emissions testing. I have failed 2x now, first on Eurodyne Stage 2, then on 1.5. It's failing due to "Cat. Conv Unsupported-Programming error". It passes all readiness checks, except it said Catalytic Converter: Unsupported. I only drove on the...

I tried autocrossing my '15 GTI yesterday and was getting a ridiculous amount of white smoke out of the exhaust on a hard right turnaround. Car smoked like a train on the same corner 3 out of five runs, and seemed to lose power coming out of that corner on the 5th run, so I limped in and shut...

Finally got around to getting my car aligned, and my front camber is -.7/-1.4 in front. The only way to adjust it is to basically loosen all four subframe bolts and shift the subframe. Does anyone else have this much camber difference in front, and if so, have you tried to adjust it? I'm...

Just lowered my '15 DSG Autobahn on ST XTA Coilovers. Still getting the ride heights dialed in, trying to resist the temptation to dump it. Currently sitting around 25 1/8" FTG all around. 225/40/18 on 18x8.5 +35 Konig Kilograms. Running 6 clicks from full stiff front, 5 clicks from full...

Just installed some Konig Kilogram 18x8.5 +35 with 225/40/18 Continental Extreme DW Wheels are 20lbs, tire 21. Total 41lbs. The rear is perfectly flush, the front has a few mm of poke that should be remedied with a drop and possible added negative camber. Will post better pics next week.

I ordered a set of ST XTA coilovers and now I'm wondering whether I have the 50mm or 55mm front strut clamp. The car is a November build date, Autobahn DSG, non-PP. I don't have access to my car right now, and should be installing them next week. I'm really hoping i have the 55mm version...

Just picked up a '15 Autobahn DSG GTI up a couple weeks ago. This I've settled on installing ST X Coilovers, now looking for wheels. Really interested in the TSW Bathurst, most likely 17x9 +50, with 255/40/17 PSS. Just not certain that the inside will clear the strut. Anyone run anything...