Because of my ignorance, for my 2015 Golf GTE I've got the virtual cluster for e-Golf (795 A) instead of the GTE one (794 A).
After online CP removal, it works great, including the RPM, except the fuel level. Anybody knows if I can make it work from coding or admap? Can anybody share his admap? Or firmware file?
Thank you!
R
AFTER retrofit:
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 5G1 920 795 A HW: 5G1 920 795 A
Component: KOMBI 407 3194
Coding: 07AC7B886FCC060001886B1F5601030000000000
Shop #: WSC 20239 005 104857
ASAM Dataset: EV_DashBoardVDDMQBAB 009058
ROD: EV_DashBoardVDDMQBAB_009_VW26.rod
VCID: 2E0E669A30991D3A8DF-807A
1 Fault Found:
13636608 - Control Module Incorrectly Coded
U1014 00 [00001001] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Reset counter: 0
Mileage: 116054 km
Date: 2024.03.25
Time: 22:25:16
-------------------------------------------------------------------------------
BEFORE:
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 5G1 920 754 HW: 5G1 920 754
Component: KOMBI 306 4300
Coding: 07251B086FCC000800887A1B1601000000000000
Shop #: WSC 01357 011 00200
ASAM Dataset: EV_DashBoardVDDMQBAB 009042
ROD: EV_DashBoardVDDMQBAB_009_VW26.rod
VCID: 6882D082D2FD830AA7B-803D
No fault code found.
-------------------------------------------------------------------------------