GTI Jake
Autocross Champion
- Location
- Charlotte, NC
Nah, I’ll probably never do it. Wife is still salty I started to wrap it once and peeled it off after hitting a deer
7
What did you do to your mk7 today?
- Thread starter GTA5
- Start date
Nah, I’ll probably never do it. Wife is still salty I started to wrap it once and peeled it off after hitting a deer
They do look pretty similar. Couldn't pass up the $400 for a full set of wheels though. I even bought a spare lol
Thanks!
wasbaggedonce
Autocross Champion
- Location
- PA
- Car(s)
- 2020 GLI Autobahn
I’m considering it. I’ve never had DCC before though so I’m gonna have to research all of that. Read something about cancelers for them or coding it off.
$400 a set? Crazy. Think they're clear BBK?
GTI Jake
Autocross Champion
- Location
- Charlotte, NC
Shop hangs with my son. He was pretty pumped to hang the old tv out here.
I’m debating about a Macan setup. But I’ll have to measure first.
If I remember right there was another member here who bought the same wheels at the same time I did and they did not clear their bbk. I don’t remember which kit they had though, possibly stop tech?
Maybe as in the Macan thread if anyone with Macan's live near you. You could do a test fit.
MonkeyMD
Autocross Champion
Was going to respond, but I got the F2's, so not apples to apples as design plays a big role.
Would've needed 10mm spacers to clear 355mm ST40. Macan brakes need more clearance afaik.
This was with 5mm spacers
"Heavy. There's that word again. What's wrong with the future? Is there a problem with the Earth's gravitational pull?"
jimlloyd40
Autocross Champion
- Location
- Phoenix
- Car(s)
- 2018 SE DSG
Maybe it was just heavy.
Got this all installed. I followed the CPO guide and drilled the hole where he did, but it makes the wires pinch up when I close it, so not quite too happy about that. Probably a non-issue once I get a pod for it, cause it’s just sitting loose in there now.
Anyone wanna 3d print me a little pod for it?
El_bigote_AJ
Autocross Champion
- Location
- Las Vegas
- Car(s)
- 2019 GTI bunny
https://cjmind.com/collections/vw-mk7-2015/products/mk7-7-5-2015-golf-gti-r-coin-tray-podView attachment 235036
Got this all installed. I followed the CPO guide and drilled the hole where he did, but it makes the wires pinch up when I close it, so not quite too happy about that. Probably a non-issue once I get a pod for it, cause it’s just sitting loose in there now.
Anyone wanna 3d print me a little pod for it?
sterkrazzy
Autocross Champion
- Location
- United States
- Car(s)
- Turbo. Blue.
Can you even see that while you're driving?