So just did made a small update to the interior. We now offer an Auto Headlight Upgrade , which is essentially a plug and play light sensor that when used in conjunction with an auto headlight sensor gives you auto headlights.
All you need is this:
and this
Installation is very simple and it goes a little like this:
Stock switch:
Just press in and turn clockwise a few degrees to the parking light setting to release the lock:
You can then remove the switch (Note we have blue wires because we have the APR boost gauge installed)
Press the tab on the connector to release. A bone tool helps but isn't necessary
Next using an interior tool / bone tool pry the access cover off the side of the dash
Cover off
You can now connect the harness from the sensor
Fish the wire back through the opening
Run the sensor up to the corner of the dash and windshield and again using the interior tool carefully press the wire in the crack to secure and hide it.
Work it all the way back to the panel opening
Bundle and zip tie the excess
You can then pop the cover back on. We actually were able to clean it up even more so that no wire was exposed
A look at the sensor from the driver's seat
You can now plug in your new switch
All installed, just turn to 'Auto' and forget it
And a shot of the car just for fun,