VeloDub1
Passed Driver's Ed
- Location
- Orange County, CA
Just mounted the new ECS Flowformed wheels, did a little photo shoot ;-)
These are the 19x8.5 +45 Matte Gunmetal.
Conti 235/35/19 tires (Stock)
I'm not running wheel spacers.
Car is lowered on EMD (Emanual Design) Golf R springs with the rear perch pads installed.
The wheels weigh in at 21.1lbs.
My stock 19" Englishtowns are 25.5.lbs
Very reasonable price for a set of flowformed wheels. ($900 set)
The center caps are metal, very solid quality.
Originally I had intentions of powder coating these black, but seeing them in person, the matte gunmetal color and finish overall was excellent. So I decided to mount them as is.
Will see how these hold up, strength and finish, but so far very happy with this purchase. ;-)
These are the 19x8.5 +45 Matte Gunmetal.
Conti 235/35/19 tires (Stock)
I'm not running wheel spacers.
Car is lowered on EMD (Emanual Design) Golf R springs with the rear perch pads installed.
The wheels weigh in at 21.1lbs.
My stock 19" Englishtowns are 25.5.lbs
Very reasonable price for a set of flowformed wheels. ($900 set)
The center caps are metal, very solid quality.
Originally I had intentions of powder coating these black, but seeing them in person, the matte gunmetal color and finish overall was excellent. So I decided to mount them as is.
Will see how these hold up, strength and finish, but so far very happy with this purchase. ;-)
Attachments
-
ECS-Wheels107.jpg383.1 KB · Views: 641
-
ECS-Wheels106.jpg402.5 KB · Views: 612
-
ECS-Wheels105.jpg368.5 KB · Views: 606
-
ECS-Wheels104.jpg301.6 KB · Views: 624
-
ECS-Wheels103.jpg356.1 KB · Views: 854
-
ECS-Wheels102.jpg363.3 KB · Views: 587
-
ECS-Wheels101.jpg375.9 KB · Views: 597
-
ECS-Wheels100.jpg333 KB · Views: 597