Recent content by mongorie

I listened. Rutheriums are good and cheap. Also they aren't as common so will be faked less.I can buy 3 sets of rutheriums for the price of a set of rs7 plugs.

Disable stop start so I can use a normal lead battery. I also did brake bias settings which used the back brakes more. Before they were cool to touch after a hard drive,now they burn you.

I'm glad I don't need to fiddle with the wastegate again. I think the DV melted when I didn't adapt the actuator the first time correctly.

I replaced my DV ,it's was melted badly

Not on the world market gti. Pic of the voltages:

So i changed the voltage to 3.55v and did a 3rd gear pull, doesnt seem much different. https://datazap.me/u/mongorie/355v-is20-actuator-eqt-vortex-standard-3rd-gear-pull?log=0&data=8-13

Damn,looks like I need to drop the voltage down again.Shouldnt take too long now I have experience....

Eqt standard

My last log was a 3rd gear run,hits target boost at around 3800

Will 3.5 be better tho? It's much better than the mahle actuator as it is. If I can get around 24psi at 3000 rpm it would be awesome. Comparing to bippity's log it seems to hit peak around the same rpm.

I got my old is20 actuator put in place of the Eqt actuator and it seems so much better.Took me a couple of hours adjusting it with engine running to get to 3.75. Adapt semi failed but seem to acknowledge voltage. I position end stops for 5 secs，user abort and go to first adapt. Switch off and...

This is my second revision, hot ambient temps with 3.9v wastegate (cannot adapt) https://datazap.me/u/mongorie/v2-tc-3rd?log=0&data=8-13

Damn that's impressive, what are your ambient temps?

Nope, it was just a revision to my v2 tune, more boost and timings. Maybe they went over the limits) parameters. Is your car also world market like mine?