Ehlectric
Passed Driver's Ed
- Location
- Alberta, Canada
Anyone know roughly what it costs to install some springs? VW Hunt Club said it takes 6 hours at 132 an hour.... I'd like to do it myself, but don't have the tools / location to do so.
Anyone know roughly what it costs to install some springs? VW Hunt Club said it takes 6 hours at 132 an hour.... I'd like to do it myself, but don't have the tools / location to do so.
What tools do you need? I did myself. Was annoying doing 2*4 method but not that bad. Rears took one hour for both. Fronts were about 1 hour to 1.5 each. Do you have a driveway? That's where I did mine.
Rodgers performance quoted me 450 with alignment. Shop is immaculately clean, would totally trust them.
Unfortunately no I live in an apartment. Might be able to do it in the garage. All I have is a basic socket set.
Thanks for all the responses though!
Anyone in the Ottawa/Gatineau region would be down for a little meet and greet and/or cruise in the Gatineau park sometimes this month?
I am out of commission until first weekend of june probably due to some engagements on weekends/sports during the week. Ideally we could all head up to luskville one weekend. I think Sam (613B6) will probably be wanting to go back soon to go mid low 11's. My clutch will hopefully be installed by then too.
Anyone in the Ottawa/Gatineau region would be down for a little meet and greet and/or cruise in the Gatineau park sometimes this month?
I am out of commission until first weekend of june probably due to some engagements on weekends/sports during the week. Ideally we could all head up to luskville one weekend. I think Sam (613B6) will probably be wanting to go back soon to go mid low 11's. My clutch will hopefully be installed by then too.
Dieing to get back, damn rain all the time. Got some rubber on now and a few more bolt-ons lol I saw GIAC went 11.5@120 so I know its possible with a good 60ft.
Me too....I have been having dreams of hitting mid low 12's! You are right though. Once I get the clutch in I am going to launch way more aggressive. Just got to find a way to build some boost, cut a 1.8 60' or so.
You shouldn't have an issue beating that time. BTW the GIAC cars pull seats and spare etc. I believe. Aren't you still full weight? You are already 100lbs over the curb weight of an R - big advantage. 100lbs + traction = 121-122mph.
I am going to take the passenger and rear seats out and run 1/8th tank of an E85/94 blend. Clutch should be in first week of June.