I switched my DRLs to fogs. What are the channels I need to change to revert back to the original setting of having my high beam bulbs be the DRLs? No lighting package, regular reflector housings.
Thanks.
How? I want my fogs and led strip as DRL
I switched my DRLs to fogs. What are the channels I need to change to revert back to the original setting of having my high beam bulbs be the DRLs? No lighting package, regular reflector housings.
Thanks.
OUTSTANDING! I'm doing this as soon as I get home.... Thanks so much!Run Fogs as DRLs
1 Select Central electrics module
2 Select Security access
3 Enter the magic number 31347
4 Select Adaptation left fog-light
5 Search for "LB45" and select Leuchte12NL LB45
6 Select Lichtfunktion B 12.
7 The Stock-setting should be "not active". Only if this is so, change to "Tagfahrlicht"
8 Click on green tick to enact change right fog-light
9 Go back to Adaptation
10 Search for "RB5" and select Leuchte13NL RB5
11 Select Lichtfunktion B 13.
12 The Stock-setting should be "not active". Only if this is so, change to "Tagfahrlicht"
13 Click on green tick to enact change table
Run Fogs as DRLs
1 Select Central electrics module
2 Select Security access
3 Enter the magic number 31347
4 Select Adaptation left fog-light
5 Search for "LB45" and select Leuchte12NL LB45
6 Select Lichtfunktion B 12.
7 The Stock-setting should be "not active". Only if this is so, change to "Tagfahrlicht"
8 Click on green tick to enact change right fog-light
9 Go back to Adaptation
10 Search for "RB5" and select Leuchte13NL RB5
11 Select Lichtfunktion B 13.
12 The Stock-setting should be "not active". Only if this is so, change to "Tagfahrlicht"
13 Click on green tick to enact change table
Does this work for auto headlights ?
Sent from my iPhone using Tapatalk
You have to turn the auto off ("O" position) Then they work as normal once the e-brake is lowered.Anytime your DRLs are on, the fogs will be on. Not sure how DRLs work with auto.
Also, have fogs as coming home / leaving home, instead of the xenons.
Also, have fogs as coming home / leaving home, instead of the xenons.
Nice. I need to do that one.
Sent from my iPhone using Tapatalk
You successfully retrofitted fogs (I know there was a thread before, but idr what happened)? Edit: nvm yes you did lol.Nice. I need to do that one.
Sent from my iPhone using Tapatalk
I have mine (16 with auto LP) set so that fogs are on in daytime with U LED DRLs. At night xenons come on, U LED DRLs stay on, and fogs turn off.
Can manually turn fogs on at night by pulling switch out.
Also, have fogs as coming home / leaving home, instead of the xenons.
Two Questions:
1 - is there a way to change the settings, once mirror dip is enabled, so that when you start driving, the mirror comes back up higher? Mine comes back up, but not as high as I want it too.
2 - is there a way to increase the brightness on the sideview mirrors, of the traffic alert symbol (when a car is in your blind spot)? Mine seems reeeeeeeeeeeeeally dim.
TIA!
Love bottom line up front answers. Thanks SPB1- no. The reason it's not going back as high as you want is because your mirror motor lacks position coordinate data. Without it, it only approximates where it's supposed to be. You need to upgrade the motor for that function to work properly.
2 - no.