DBv2 Stainless Turbo Inlet Pipe

[vw671]

This basically brand new. I only installed it but it wouldn't work with my Spulen Catch Can PCV hose so I took it off and never used it. The o-ring it comes with was basically useless and broke very easily (*it's only 1.5mm thick) so I made custom TPU 3D printed replacements. I will include 4 o-rings with this. only comes with what is pictured here.

SOLD

 

[PowerDemon]

Bump for a beautiful piece. GLWS

 

[vw671]

 

[Diggs24]

Always wondered what happened to Captain Phasma.

 

[vw671]

This is the biggest on the market. It being made out of stainless allows it to be thinner at the turbo side connector without loosing strength. It's 55mm ID on the turbo end.

 

[Wastegate13]

Do I need this?

 

[vw671]

SOLD

 

[THEREALVRT]

What exactly was the issue with this and the spulen parts?

 

[vw671]

What exactly was the issue with this and the spulen parts?

Not enough room to get the 10AN style PCV hose on.

 

[mto386]

What you replace it with?

 

[vw671]

What you replace it with?

I was trying to replace my MST with it...but keeping the MST.

 

[THEREALVRT]

Not enough room to get the 10AN style PCV hose on.

Thanks. I have a bms inlet and had to remove the plastic clip on the firewall right above the pvc connection to be able to fit the 90deg fitting on my spulen kit

 

[vw671]

Thanks. I have a bms inlet and had to remove the plastic clip on the firewall right above the pvc connection to be able to fit the 90deg fitting on my spulen kit

DBv2 is past that, under the firewall...

MST:

 

[Diggs24]

That...looks like fun.

 

[allan1229]

https://www.mst-performance.com/products/vw-mk710v2