Need Advice on how many of these holes I should plug....

[stillwellm10]

Since it was nice out in the Chicagoland area I decided to install my Rho-Plate V2. It was to my surprise that I have 6 holes I have to cover when I thought worse case was only 2. I'm just looking for suggestions as far as how many I should plug and what to use to plug. The holes range from just shy of 1/4 inch and 5/16 inches. Thanks again!

Sent from my S8+ using Tapatalk

 

[somerset9]

Why is how many holes to plug a concern? It's just a plastic bumper and it should only matter cosmetically how many holes you choose to plug.

 

[SpaceGhost]

in the middle is better feng shui I’d put it back

 

[miked617]

If your getting a FMIC then i can understand the move. I will be down that same rabbit hole myself. Will probably have a body shop fix it.

 

[stillwellm10]

Why is how many holes to plug a concern? It's just a plastic bumper and it should only matter cosmetically how many holes you choose to plug.

Yes that's true, but I wanted others opinion as which route would look best cosmetically.

Sent from my S8+ using Tapatalk

 

[Parabola]

I would cover them all by putting back the license plate in the middle.

 

[stillwellm10]

If your getting a FMIC then i can understand the move. I will be down that same rabbit hole myself. Will probably have a body shop fix it.

No intercooler at least until the near future, just wanted a different look for now.

Sent from my S8+ using Tapatalk

 

[stillwellm10]

I would cover them all by putting back the license plate in the middle.

Thank you for your input, I'm weighing all my options atm.

Sent from my S8+ using Tapatalk

 

[spelk3]

Hole plugs or maybe a metal plate with numbers and letters on it.

 

[Diggs24]

Put plate back in middle.

 

[racerxxx]

https://www.amazon.com/WIDGETCO-White-Hole-Plugs/dp/B00TQ5ALQS

https://www.amazon.com/gp/aw/d/B00T...+hole+plug&dpPl=1&dpID=319NEexuE8L&ref=plSrch

Cheaper than a body shop

Sent from my SM-G930U using Tapatalk

 

[Sandman GTI]

OP,
Try Bumper Plugs.com.
Cost a little higher but might be color matched.
Check on it.

Poisition the plate where ever you want.

 

[stillwellm10]

OP,
Try Bumper Plugs.com.
Cost a little higher but might be color matched.
Check on it.

Poisition the plate where ever you want.

I checked their website and their plugs will fit nothing larger than 1/4 inch. The four outer holes are larger than this dimension so I'd only be able to cover 2 of the total 6.

Sent from my S8+ using Tapatalk

 

[demi9od]

Need Advice on how many of these holes I should plug....

 

[ReadTheBook]

You can also take your paint code, which, assuming that's Pure White is LC9A, get a small rattle can of it made up by various sites online or even some local body shops do it from what I've read, get some plugs you find at lowes/Home Depot etc, prime them, spray them, clear them and put them in.