crxgator
Autocross Champion
- Location
- Raleigh, NC
- Car(s)
- All the MQBs
At this point in time nothing.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
At this point in time nothing.
Sent from my iPhone using Tapatalk
Golf R downpipe with second cat
Golf R midpipe with resonator
No muffler
Sent from my iPhone using Tapatalk
https://datazap.me/u/kenbenton13/19psi-max?log=0&data=1-2-3-4-5-8-11-12-14
Looking for some suggestions here. This is my Alltrack map6 with dp and intake. I’m concerned about the ign1 not increasing as smoothly as some of my previous logs on lower boost but I still don’t know exactly what I’m looking at tbh. Boost is starting at 14 and working up to 19. FOL 80 on 93 pump.
You took your foot off the floor......
New to this thread! Installed a JB4 onto my 2017 GSW 4Motion DSG last week, but still had 87 in my tank. Once it was empty and I filled it with 91, I was finally able to enable Map 1! Took some 3rd gear logs in Map 4 and Map 1, and recorded a comparison video between stock and Map 1. Aside from the JB4, I have a modded stock airbox; otherwise the car is stock.
https://www.youtube.com/watch?v=j6E2mnsfqys
I will probably do some Map 6 tweaking soon -- good thing I read through this whole thread so I (sort of) know what to do and what to look for! Also have an IS20 in my garage for later install..
Yes it will flow it easily. If I was all yolo i'd do it but i'm not sure what the motor can hold power wise. And I need to find out if you can just swap GTi injectors without having to rewrite ecu. Rumor is ecu will recongnize and adjust it's self like when Gti guys swap R injectors
So the car runs great so far with the turbo installed, but I think it won't hit the desired boost without changing 6-cyl timing logging to 1.
Now it doesn't go past 20 psi and starts tapering after 4500 to around 15.
THX yes there is the problem. Would like to swap some bigger injectors. I think after 4500 I have to taper to 19/17/16/16/16 otherwise I have problems.Yes, change that to 1. Just be careful and keep an eye on AFR/trims if pushing it.