IS20. I haven't see any codes yet and I scan with obdEleven often. I originally had my FOL at 60 but was advised to make it 70. I just lowered it back to 60 and plugged in the suggested values by tipo. Here's the log - https://datazap.me/u/merc/log-1511582511?log=0&data=1-3-4-5-6-11-18-19-23-25-26-27
That's what kind of freaks me out, what I posted above was less aggressive than what George was telling me to run. Maybe he thinks I have an is20 swap...I'm stock with an inlet running 93.
Thank you for the recommendation, I plugged them in and pulled a log:
https://datazap.me/u/merc/log-1511582511?log=0&data=1-3-4-5-6-11-18-19-23-25-26-27
What exactly are you guys looking at in the logs to see if it's good or bad? I looked the ign 1-4 values and they jump all over, thinking that's not good. I also looked at the my initial boost value and then 1000rpms from it to see if I reached peak boost and I'm not, I remember reading somewhere that I should be at peak around there.
Sorry, now I am a little confused. At first you said it is stock and then you said is20. You still have two dips in your ign1. Maybe you can get it to climb without dips.