Hi guys!
So I've been partially successful in retrofitting my '16 GTI with ROW non-LED tails. I wanted to retain the NAR look and only replace the bulbs with LEDs from deautokey while enabling the rear amber turn signal.
I bought the outer housings, installed them, wired them with the BEC harness and followed the BEC (not DAP) instructions. I've even managed to code the inner lights to brake as well.
Everything works fine. However, the outer tails' running/parking/brake lights still operate along with the amber signals. Is there anyway to code them as parking/brake only like the inner lights?
I've double-checked all my coding.
I've made this short video (alternating between parking only and brakes) indicating what's going on:
https://youtu.be/L6eTdFpcilE