Visor Warning Tag Update.
I went to Badgeskins web site to buy some items for the engine cover area. I noticed they have the same art work for the visor warning sticker that fellow forum member "OaklandGTImike" developed in 2015. I purchased this original design made thru Motogfx.com - West coast. This original sticker is the first item below. Over time the edges have been peeling back no matter how much I push it back down.
The new sticker looks much like the original.
It has a clear film application cover, which makes install a lot easier and you can press down on it without touching the actual sticker.
I used the alcohol pad provided, but the first try the new sticker would not stay on. I removed it and used a micro fiber cloth and denatured alcohol to scrub and clean the warning tag, after 10min of drying the sticker held. I left the clear application film on for 2 days so I would press on it more when it was hot in the car. After removing the film it looked good.
Positives:
1. The sticker is thinner and looks better.
2. The colors are better and blend with the visor better than the older one.
3. The VW and GTI logo stick out some, making it look 3D.
4. Application film is much better.
5. Material also feels better. Texture more like visor surface.
Negative - Clean good so it sticks.
Bottom line a big improvement on the design.
Original Sticker
