2016 VW Golf SE with Lighting Package and Front Fog Lights

[stillwellm10]

Hey everyone, I've had a hell of time trying to find info online regarding adjusting the movement of the light pattern that's displayed by the front fog lights of my Golf. The picture below depicts the hole in which you would use a tool to turn to line up the beam pattern on the fog lights. With no luck I haven't been able to find what tool is needed, and don't want to start poking at it and possibly break something. I've reached out to ShopDap and the Humble Mechanic, though I haven't heard back yet from them. Any input would be greatly appreciated!

Sent from my S8+ using Tapatalk

 

[Sc629]

The maintenance book describes it as an "adjustment screw" which leads me to believe a Philips head would work


Sent from my iPhone using Tapatalk

 

[videoguy009]

It takes a larger allen key.

 

[Sc629]

Might be the same as the LP headlights which you can use either an Allen key or Phillips head then. Better with Allen key


Sent from my iPhone using Tapatalk

 

[stillwellm10]

I didn't have any luck when using a larger Allen key.

Sent from my S8+ using Tapatalk

 

[southpawboston]

It takes a long philips head screwdriver.

I retrofitted these to my Golf, I think that's what I remember seeing when I looked inside the adjuster barrel.

 

[stillwellm10]

It takes a long philips head screwdriver.

I retrofitted these to my Golf, I think that's what I remember seeing when I looked inside the adjuster barrel.

Thank you! I'll try that and report back[emoji1360]

Sent from my S8+ using Tapatalk