Alrighty, going through the basic settings I tried running through the adaptations for the rear window.Here's the fault...
I'm going to try something BRB...
I had the same issue with same vcds error,
This worked for me: when relearning the windows, instead of holding the window switch down/up for 3-5 seconds try double clicking the switch after its reached the top and bottom.
Already done (see post #20).If you have VCD or obd11, you'll want to do the basic window regulator test. Basically it just needs to relearn the up/down positions then will work normally.
Sent from my SM-N910V using Tapatalk
To follow up on this the dealership was able to go through the basic adaptations of the controller module and fix the problem.Car is at the dealership now. They'll be checking this out for me shortly.
I'll let everyone know what happens.
Not necessarily. But putting a small battery in place to keep all the modules powered and error free might be for the best.Sounds like power needs to be maintained when changing batteries.