GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Fog light connector

S

SuperSprayed

Passed Driver's Ed
Location
GA
I broke my fog light connector, 07P 973 702, taking off my front bumper today. The yellow inside piece is the one that actually broke - I will attach pictures. My questions are, does the whole wire need to be replaced or can I just replace this little connector part? From what I can tell there is something metal from the wiring stuck inside the + and - terminals of the connector so not sure if that would mess me up or not.

And 2, if the whole wiring does have to be replaced, is it difficult?

Sorry if I’m in the wrong thread I couldn’t find a good spot for this
 
A

ashsdad

New member
Location
Ahoskie NC
I broke mine as well. I ended up taking it to the dealer and having them replace it since it requires a special crimping tool to fix.
 
S

SuperSprayed

Passed Driver's Ed
Location
GA
ashsdad said:
I broke mine as well. I ended up taking it to the dealer and having them replace it since it requires a special crimping tool to fix.
Click to expand...

Thanks, what did they charge you?
 
Carlosfandang0

Carlosfandang0

Autocross Newbie
Location
UK
Car(s)
2016 3Dr GTi DSG CSG
You can buy these as a repair piece with the two wires already in the plug for around $5 from Ebay or a VW dealer, the plug is also used on the cam magnets I believe, as well as other things,

Also available for peanuts on aliexpress,

https://www.aliexpress.com/item/-/32853427015.html
 
Last edited:
T

Toothless

Passed Driver's Ed
Location
West Texas
Carlosfandango said:
You can buy these as a repair piece with the two wires already in the plug for around $5 from Ebay or a VW dealer, the plug is also used on the cam magnets I believe, as well as other things,

Also available for peanuts on aliexpress,

https://www.aliexpress.com/item/-/32853427015.html
Click to expand...
I broke mine too...thanks for posting a link for them! [emoji869][emoji869]

Sent from my SM-N960U using Tapatalk
 
You must log in or register to reply here.
Top