This is as complete a gauge kit as you could want, and is in pristine condition. Owned for almost exactly one year. $400 + shipping.
https://www.shopdap.com/catalo...view/id/580974/category/15756/
The P3 runs a cable under your dash to the OBDII port and, as configured here, has the following features (lazily and shamelessly copied from P3 site):
P3 Multi-Gauge
* Plug and Play install - just plug into your obd2 port and install into dash!
* Reads and clears OBD2 Codes
* OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
* Peak Recall on all functions
* Boost and Vacuum from OBD2 port (EA888 MAP sensor upper limit is 22.5psi. To read higher boost the analog sensor must be used)
* Optional 80 psi analog boost sensor
* Manual Dimmer
* 2 x universal 0-5v linear analog inputs
* Includes digital display, custom OBD2 wire harness and control box
Track Pack software upgrade
* Adds Air/Fuel ratio through the OBD2 port
* Adds 0-100/60-130/60-0/100-0 timers
Optional 80psi boost sensor
* Allows gauge to read boost directly from intake/charge pipe
* Plugs directly into the OBD2 harness (no wiring required)
* Can be added/removed from the gauge at any time
* Required to read boost higher than 22.5psi on EA888
OEM vent option
* We install the display in an OEM vent for your vehicle to make your install even easier
One of my favorite things about this kit is the recall function - if you're too busy (driving or doing a pull) to keep an eye on your boost, this will recall peak boost during a pull, for instance. This kit runs $514 (before tax) if configured new - You can have this one for $400 plus shipping.
Happy to answer any questions about it or send photos, but the price is firm. Thanks! :wave:
Sent from my SM-G950U using Tapatalk
https://www.shopdap.com/catalo...view/id/580974/category/15756/
The P3 runs a cable under your dash to the OBDII port and, as configured here, has the following features (lazily and shamelessly copied from P3 site):
P3 Multi-Gauge
* Plug and Play install - just plug into your obd2 port and install into dash!
* Reads and clears OBD2 Codes
* OBD2 Data for Coolant Temp, Intake Air Temp, Exhaust Gas Temp, Throttle Plate, Vehicle Speed, RPM, Shift-light, Battery voltage, 0-60 timer
* Peak Recall on all functions
* Boost and Vacuum from OBD2 port (EA888 MAP sensor upper limit is 22.5psi. To read higher boost the analog sensor must be used)
* Optional 80 psi analog boost sensor
* Manual Dimmer
* 2 x universal 0-5v linear analog inputs
* Includes digital display, custom OBD2 wire harness and control box
Track Pack software upgrade
* Adds Air/Fuel ratio through the OBD2 port
* Adds 0-100/60-130/60-0/100-0 timers
Optional 80psi boost sensor
* Allows gauge to read boost directly from intake/charge pipe
* Plugs directly into the OBD2 harness (no wiring required)
* Can be added/removed from the gauge at any time
* Required to read boost higher than 22.5psi on EA888
OEM vent option
* We install the display in an OEM vent for your vehicle to make your install even easier
One of my favorite things about this kit is the recall function - if you're too busy (driving or doing a pull) to keep an eye on your boost, this will recall peak boost during a pull, for instance. This kit runs $514 (before tax) if configured new - You can have this one for $400 plus shipping.
Happy to answer any questions about it or send photos, but the price is firm. Thanks! :wave:
Sent from my SM-G950U using Tapatalk