funks
Ready to race!
- Location
- Dublin, CA
Current Mod List:
My Costs Sheet.
https://docs.google.com/spreadsheets/d/1213mkaGtjREJ22XU-8iginhcYxDUuMlKRVKI-hY0Bec/edit?usp=sharing
My Build Log..
04/03/2018 - Picked Up 2018 - Indium Gray Golf R
04/04/2018 - Installed Floor Mats
Findway 3D Floor Liner
04/05/2018 - Installed JackPads [Audi]
(1x) - 8V0 825 271 - Outer Trim Left Side
(1x) - 8V0 825 272 - Outer Trim Right Side
(2x) - 8V0 804 631 - Rubber Bungs
(1x) - 8V0 802 845 - Jack Socket Left Side
(1x) - 8V0 802 846 - Jack Socket Right Side
(2x) - 8V0 802 847 A (Audi Wedge Pads Rear)
04/06/2018 - Installed Wheels/Tires along with Rally Armor MudFlaps
Wheels: Konig Ampliform - 18x8.5 ET43
Tires: MPSS 245/40R18
Mud Flaps: Rally Armor
04/08/2018 - Clear Bra (Suntek Ultra) @ Classic Ride Clear Bra (Hayward)
04/16/2018 - Replacement DSG Paddles
**Jagonese/Axmotiv
04/18/2018 - VW Homelink Rear View Mirror
04/29/2019 - APR SubFrame Insert (MS100141 even though I have a 2018)
Note: I installed the APR slightly tilted (as shown in the pic), I went back and corrected the alignment (now straight front and back) but didn't get a chance to take a new pic.
04/30/2018 - VW671 Front License Plate Relocate
06/28/2018 - MSS Suspension Kit, Super Pro 24mm RSB, Moog Endlinks
* MSS Fully Adjustable Street Kit - replaced rear orange with Swift Spring below.
* Swift Springs - 178mm in Free Length (7 inch), 336 lbs/inch, 60mm ID #Z60-178-060
* SuperPro 24mm RSB - #RC0052RZ24
* Moog Rear Endlinks (made of metal, not plastic composite). - #K750809
06/30/2018 - Spare Tire, Foam, and Rear Plastic Trim with tire cutout installed
5G0012115N - VW Foam Tool Box Lower- Quantity 1
5G6863459L82V - VW Cover for Lock Carrier - Quantity 1
5G0-601-011 - Audi Spare Wheel (18 inches) - Quantity 1
5C0-011-031-B - VW Scissor Jack - Quantiy 1
5Q0-011-221 (superseded 5QM-011-221) - Short Jack Handle - Quantity 1
07/10/2018 Replace the Audi Hex Jack Pad and Audi Jack block on the rear with Jack Snubber / Jack Snubber grommet lifting pads
Note: the Audi Hex Jack Pad, and the Audi Jack Block on the rear is awesome OEM stuff but it's making it a pain in the ass for me to raise my car on the lift. They take up a bit too much space and makes it difficult for me to insert spacer pucks on my lift. Moreover - they aren't really made for lifts in general as it's not level, only for floor jacks.
Got the following from e-Acca for less than 68$ shipped.
Front:
(1x) 8V0825271 and (1x) 8V0825272 splash shields
(2x) 8N0803855 jack snubber, (2x) 8N0804583 (jack snubber grommet)
Rear:
(2x) 8N0803855 jack snubber, (2x) 8N0804583 (jack snubber grommet)
8V0825271
8V0825272
8N0803855
8N0804583
I also purchased the following from eBay - to make lifting easy peasy.
07/25/2018 Installed the Leyo Motorsport Subframe Bushing Insert Kit #L141G
09/24/2018 Received Steering Wheel from RoyalSteeringWheels.com - installed.
My Costs Sheet.
https://docs.google.com/spreadsheets/d/1213mkaGtjREJ22XU-8iginhcYxDUuMlKRVKI-hY0Bec/edit?usp=sharing
My Build Log..
04/03/2018 - Picked Up 2018 - Indium Gray Golf R
04/04/2018 - Installed Floor Mats
Findway 3D Floor Liner
04/05/2018 - Installed JackPads [Audi]
(1x) - 8V0 825 271 - Outer Trim Left Side
(1x) - 8V0 825 272 - Outer Trim Right Side
(2x) - 8V0 804 631 - Rubber Bungs
(1x) - 8V0 802 845 - Jack Socket Left Side
(1x) - 8V0 802 846 - Jack Socket Right Side
(2x) - 8V0 802 847 A (Audi Wedge Pads Rear)
04/06/2018 - Installed Wheels/Tires along with Rally Armor MudFlaps
Wheels: Konig Ampliform - 18x8.5 ET43
Tires: MPSS 245/40R18
Mud Flaps: Rally Armor
04/08/2018 - Clear Bra (Suntek Ultra) @ Classic Ride Clear Bra (Hayward)
04/16/2018 - Replacement DSG Paddles
**Jagonese/Axmotiv
04/18/2018 - VW Homelink Rear View Mirror
04/29/2019 - APR SubFrame Insert (MS100141 even though I have a 2018)
Note: I installed the APR slightly tilted (as shown in the pic), I went back and corrected the alignment (now straight front and back) but didn't get a chance to take a new pic.
04/30/2018 - VW671 Front License Plate Relocate
06/28/2018 - MSS Suspension Kit, Super Pro 24mm RSB, Moog Endlinks
* MSS Fully Adjustable Street Kit - replaced rear orange with Swift Spring below.
* Swift Springs - 178mm in Free Length (7 inch), 336 lbs/inch, 60mm ID #Z60-178-060
* SuperPro 24mm RSB - #RC0052RZ24
* Moog Rear Endlinks (made of metal, not plastic composite). - #K750809
06/30/2018 - Spare Tire, Foam, and Rear Plastic Trim with tire cutout installed
5G0012115N - VW Foam Tool Box Lower- Quantity 1
5G6863459L82V - VW Cover for Lock Carrier - Quantity 1
5G0-601-011 - Audi Spare Wheel (18 inches) - Quantity 1
5C0-011-031-B - VW Scissor Jack - Quantiy 1
5Q0-011-221 (superseded 5QM-011-221) - Short Jack Handle - Quantity 1
07/10/2018 Replace the Audi Hex Jack Pad and Audi Jack block on the rear with Jack Snubber / Jack Snubber grommet lifting pads
Note: the Audi Hex Jack Pad, and the Audi Jack Block on the rear is awesome OEM stuff but it's making it a pain in the ass for me to raise my car on the lift. They take up a bit too much space and makes it difficult for me to insert spacer pucks on my lift. Moreover - they aren't really made for lifts in general as it's not level, only for floor jacks.
Got the following from e-Acca for less than 68$ shipped.
Front:
(1x) 8V0825271 and (1x) 8V0825272 splash shields
(2x) 8N0803855 jack snubber, (2x) 8N0804583 (jack snubber grommet)
Rear:
(2x) 8N0803855 jack snubber, (2x) 8N0804583 (jack snubber grommet)
8V0825271
8V0825272
8N0803855
8N0804583
I also purchased the following from eBay - to make lifting easy peasy.
07/25/2018 Installed the Leyo Motorsport Subframe Bushing Insert Kit #L141G
09/24/2018 Received Steering Wheel from RoyalSteeringWheels.com - installed.
Last edited: