GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

BMS JB4 R specific thread

bheggelke

Passed Driver's Ed
Location
Eastern Shore
Got in touch with George

Here are the numbers George and I settled on for now after a couple of revisions. I also bumped up another 0.5 psi at 3000 and 3500 from the values he gave me. Big improvement versus my first Map 6 post here a few days ago.

I also just added a CTS turbo inlet pipe tonight and it *feels* even more zippy now. Sidenote: that PCV breather hose connection is a bitch to pry off.

Posting the datazap logs for reference.

1500 0
2000 2
2500 3
3000 3.5
3500 4
4000 4.5
4500 5
5000 5.5
5500 5
6000 4.5
6500 4
7000 4

FOL: 45
boost safety: 26


3rd gear - Datazap

4th - Datazap
 

Mike Jesse

Passed Driver's Ed
Location
Bremerton, Wa.
Last week I installed a Group 3 JB 1 on my new Golf R I had sitting on the shelf.
Per the Burger web page the Group 3 JB 1 is designed for the 1.8 L cars like my Sportwagen.

It runs fine and dropped my quarter mile ET from 12.86 completely stock, to a 12.52. Same MPH which was 106.

Should I swap the Group 1 JB 1 for a group 1?

What am I giving up if anything?
 

NeedSleep

Go Kart Champion
Location
USA
Car(s)
2016 Golf R DSG
Last week I installed a Group 3 JB 1 on my new Golf R I had sitting on the shelf.

Per the Burger web page the Group 3 JB 1 is designed for the 1.8 L cars like my Sportwagen.



It runs fine and dropped my quarter mile ET from 12.86 completely stock, to a 12.52. Same MPH which was 106.



Should I swap the Group 1 JB 1 for a group 1?



What am I giving up if anything?

It's the same unit. Enjoy

Sent from my SM-G930T using Tapatalk
 

Langer1

Passed Driver's Ed
Location
Baltimore
APR intercooler and awe downpipe going in

After install of the above mods, next step is to log in map 4? Right now I’m map 2 with 93 fuel.
No other performance mods besides those.
Thanks!
 
Last edited:

_Dejan_

Passed Driver's Ed
Location
Slovenia
After install of the above mods, next step is to log in map 4? Right now I’m map 2 with 93 fuel.
No other performance mods besides those.
Thanks!


No MAP4 is VALET/FAILSAFE map and low boost ... If you are in MAP2 then you can start MAP6 with MAP2 values and log it, do small increments, log again and log and then do another smal change and log...
 

Langer1

Passed Driver's Ed
Location
Baltimore
No MAP4 is VALET/FAILSAFE map and low boost ... If you are in MAP2 then you can start MAP6 with MAP2 values and log it, do small increments, log again and log and then do another smal change and log...

Is there any way to access those map2 settings, so I can transfer to map6. All I see on the software is map6 base settings.
Thank you!
 

Diggs24

Autocross Champion
Location
de plains! de plains!
Car(s)
2015 GTI
Did my first pull on map 6 with map 2 settings. Any recommended adjustments are appreciated...

https://datazap.me/u/auxlry/map-2-setting-pull?log=0&data=1-4



1500 - 1
2000 - 2
2500 - 2
3000 - 3
3500 - 3
4000 - 3
4500 - 3
5000 - 4
5500 - 4
6000 - 4
6500 - 4
7000 - 4
 

29whitty

New member


1500 - 1
2000 - 2
2500 - 2
3000 - 3
3500 - 3
4000 - 3
4500 - 3
5000 - 4
5500 - 4
6000 - 4
6500 - 4
7000 - 4

hey diggs what are you looking at primarily here ? i'm trying to learn, so i can be more self sufficient. trims in this log seem to stay pretty close to 25 the whole way through. but i see IGN doesn't really ramp up like we'd want. how did you arrive at your additive values based on this log, sorry if this is covered! just curious and you're probably the most respected / active user offering help outside of the official "George"

thanks dude!

(also didn't realize map2 boosted up to like 25 PSI ... sheesh haha :confused: )
 
Last edited:

Diggs24

Autocross Champion
Location
de plains! de plains!
Car(s)
2015 GTI
hey diggs what are you looking at primarily here ? i'm trying to learn, so i can be more self sufficient. trims in this log seem to stay pretty close to 25 the whole way through. but i see IGN doesn't really ramp up like we'd want. how did you arrive at your additive values based on this log, sorry if this is covered! just curious and you're probably the most respected / active user offering help outside of the official "George" thanks dude!

I'm looking at your car saying "this 91ACN gas sucks, yo."

https://datazap.me/u/auxlry/map-2-setting-pull?log=0&data=1-25-26-27

and "dis hot, yo!"

https://datazap.me/u/auxlry/map-2-setting-pull?log=0&data=1-6


"but i see IGN doesn't really ramp up like we'd want." yeah...it hardly moves, lol. poor quality gas and high IATs will do that.

How did I arrive at my values? Looking at lots of logs. As soon as I saw your location and stating map2 I said to myself "hope he's running some e85". *opens log* . NOPE

So, either add a few gallons of e85 or run those settings above. Set FOL to 40.
 
Top