A-Pillar Plugs Wiring Diagram ,

Does anyone knows the wiring diagram of the 4 footwell a pillar plugs red black brown blue for the MK7 .? or anything in MQB platform?

Why? what are you trying to accomplish? Maybe that will point us in a better direction to guide you.

Sure ,
From the Black Plug i already got From pin 13 the Low CAN-Extended
and pin 12 the High CANExtended .

and i succesfully connect the 3q0 lane assist camera withouth connecting her into the gateway pins wich is extremly hard to tap.

So what i am looking for maybe in those set of cables there is the equivalent CAN High and CAN low of the ACC Front radar. in order to prevent go straight all the way to the front of the car to get the 2 lines
from this diagram seem to be in connector BROWN..



camera pin 1 >> To CanBus 2 Brown Plug pin 11
camera pin 7 >> To CanBus 2 Brown Plug pin 9

i just want to verify

i can verify that if you want access to front radar can lines , you find it in the brown plug

gc9n said:

i can verify that if you want access to front radar can lines , you find it in the brown plug

Click to expand...

Thats good to know, was looking for the same information.

Sent from my SM-G955U using Tapatalk

o_a_ravi said:

Thats good to know, was looking for the same information.

Sent from my SM-G955U using Tapatalk

Click to expand...

Bummer for me, trying to retrofit the lane guidance front camera., i do have a front radar installed for DAP Front Brake Assist / Collision prevention only, but not as ACC.

Upon inspecting the TIUL connections, the radar connections for power lines, can high and low is available, however the pins 9 and 11 for camera is not available...

Looks like i may have to run it from the front.

Sent from my SM-G955U using Tapatalk