GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Help removing BCM harness for adding foglights to '17 Sport

H

Hotfart

Ready to race!
Location
LFK Kansas

Attachments

  • BCM2.jpg
    BCM2.jpg
    281.1 KB · Views: 3,566
crxgator

crxgator

Autocross Champion
Location
Raleigh, NC
Car(s)
All the MQBs
Did you remove the white clip first?


Sent from my iPhone using Tapatalk
 
crxgator

crxgator

Autocross Champion
Location
Raleigh, NC
Car(s)
All the MQBs
I haven't done it in months, so I may be wrong. But, I think you unclip the whole assembly from the black plastic. Look at the clip near C and below A. The whole BCM should come out from what I remember.
 
H

Hotfart

Ready to race!
Location
LFK Kansas
crxgator said:
I haven't done it in months, so I may be wrong. But, I think you unclip the whole assembly from the black plastic. Look at the clip near C and below A. The whole BCM should come out from what I remember.
Click to expand...

Thanks, will give that a shot here in just a bit and will report back
 
H

Hotfart

Ready to race!
Location
LFK Kansas
Hotfart said:
Thanks, will give that a shot here in just a bit and will report back
Click to expand...

Still stuck on this. Looks like there's some white levers on each harness up higher (and hard to reach), but am not sure how to release them. Someone has to know how to remove these! This is holding my entire project up! Thank you to anyone who can help!
 
H

Hotfart

Ready to race!
Location
LFK Kansas
For future reference in case others can't figure it out, you have to push in the tab circled in the pic the move the white lever up. Be forewarned, the space is really tight.
 

Attachments

  • BCM3.jpg
    BCM3.jpg
    63.4 KB · Views: 993
You must log in or register to reply here.
Top