Ironshade
Go Kart Newbie
- Location
- Atlanta Ga
Instagram-Kristian.groz
My person car build. I’ll be filling this thread with is20 setup info (previous setup) and is38 info (current setup)
Took car to dyno. Was 90’ inside temp and raining. This resulted in blow to my timing curve because only had one fictional fan and 1 othe that would barley blow.
All in all happy with results. Safe to say under better condtions 360-70whp is realistic.
Note- i can still add alot of boost down low, just choose not to due to no reason to stress motor, all racing is done 4k rpm and above.
Dyno video
https://drive.google.com/open?id=17_q7cF7gFvYyd1DNqL2j5UC1X0fQ6Dzl
Logs to compare timing (1 day apart)
https://drive.google.com/open?id=1HDX074cu0F0TwuDHsLOdsz9lmKET6TFp
Dyno slip
https://drive.google.com/open?id=1bJCAG7_7DxfFzEmfbAXmzgNA6kwO34Lb
Dyno slip 3 and 4th overlap for 5MT (4th did 155mph at 6600rpm) lol
https://drive.google.com/open?id=1YDfXmX814oHvnKLbpZP1TgMCUyGyfadz
Accleration video
https://drive.google.com/open?id=1EJy7t-S9Jbc4Czyb_6d3VXwq5buubeUn
Mods
APR is38 +jb4+ watermeth CM5 nozzle
93oct tune on 93oct fuel. I do not mix e85
Stock fueling
Ecs dump cutout on stock exhaust system
Cts downpipe
Injen intake
Ecs charge pipe
Cts throttle pipe
Majesty intercooler
Forge bov
Rs7 plugs .022
Cts elbow
Southbend stage 2 endurance clutch (5mt transmission)
Southbend light weight flywheel
My Is20 build thread https://www.golfmk7.com/forums/showthread.php?t=39376
My person car build. I’ll be filling this thread with is20 setup info (previous setup) and is38 info (current setup)
Took car to dyno. Was 90’ inside temp and raining. This resulted in blow to my timing curve because only had one fictional fan and 1 othe that would barley blow.
All in all happy with results. Safe to say under better condtions 360-70whp is realistic.
Note- i can still add alot of boost down low, just choose not to due to no reason to stress motor, all racing is done 4k rpm and above.
Dyno video
https://drive.google.com/open?id=17_q7cF7gFvYyd1DNqL2j5UC1X0fQ6Dzl
Logs to compare timing (1 day apart)
https://drive.google.com/open?id=1HDX074cu0F0TwuDHsLOdsz9lmKET6TFp
Dyno slip
https://drive.google.com/open?id=1bJCAG7_7DxfFzEmfbAXmzgNA6kwO34Lb
Dyno slip 3 and 4th overlap for 5MT (4th did 155mph at 6600rpm) lol
https://drive.google.com/open?id=1YDfXmX814oHvnKLbpZP1TgMCUyGyfadz
Accleration video
https://drive.google.com/open?id=1EJy7t-S9Jbc4Czyb_6d3VXwq5buubeUn
Mods
APR is38 +jb4+ watermeth CM5 nozzle
93oct tune on 93oct fuel. I do not mix e85
Stock fueling
Ecs dump cutout on stock exhaust system
Cts downpipe
Injen intake
Ecs charge pipe
Cts throttle pipe
Majesty intercooler
Forge bov
Rs7 plugs .022
Cts elbow
Southbend stage 2 endurance clutch (5mt transmission)
Southbend light weight flywheel
My Is20 build thread https://www.golfmk7.com/forums/showthread.php?t=39376
Last edited: